Crayola Paint maker Quick Start Manual

SETUP
1
Line up each clip with a slot on the
base. Press clip down & snap into slot.
NOTE: Assembly is permanent. Do not
remove clips from base.
CREATE YOUR PAINT
1
Choose a color to mix. The number of strips of each color
shown in the box will always add up to 5.
4
Snap paint pot lid closed & align it on paint shaker with lid
tabs in "11 o'clock" position. Turn pot clockwise until tabs
snap into place at "12 o'clock" position.
FOR BEST RESULTS:
• Protect all work surfaces & clothing. Paint strips & finished
paint may stain fabric and other household areas.
• Make sure hands are dry. Moist paint strips may stain
skin or wet surfaces.
• Fill paint pots with base paint to fill line.
Avoid overfilling.
• Follow color guide carefully: Use a total of 5 small strips
for any color you mix.
• Turning the crank faster will mix paint more quickly.
• Securely cap base paint bottle & paint pots after use
and during storage.
• Make sure all pieces are snapped into place
before transporting.
• If paint colors were stored, shake paint pots
before re-using.
CONTENTS
1 Bottle of Base Paint 4 Base Clips
1 Detachable Utility Tray 1 Detachable Paint Pot Tray
®
2
Hold paint tray slots above clips. Press
tray firmly to snap slots into clips.
Repeat with utility tray on the other
side. NOTE: Trays can be detached
& used separately.
2
Place open paint pot into tray. Add base paint to fill line.
5
Lefty or Righty! Turn crank quickly either way for up to a
minute. Stop to check color after 30 seconds. Mix more
if needed.
CLEANUP & STORE
1
Wash brush with warm water & soap. Rinse & blot dry.
Store in utility tray.
2
Wipe off base & trays with a damp paper towel.
Make sure paint strips stay dry.
3
To store Paint Maker & contents:
• Secure base paint bottle cap & store behind the paint shaker.
• Snap all paint pot lids closed & place in tray.
• Close lid to secure paint strips.
• Stand labels, color guide & unused paper in clips between
base & trays.
• To carry paint maker, raise both trays to upright (vertical)
position, then snap handle onto clip at top of each tray.
75 Paint Strips
10 Paper Sheets, 6"x9"
3
Remove paint strips from pouch & place
in utility tray. Close lid to secure. Snap
brush into slot.
15 Each: Paint Pots, Labels
Color Mixing Guide
4
Remove cap & inner seal from base paint.
Replace with nozzle & press cap on tip.
3
NOTE: Each color square has 5 peelable mini-strips. Fold strip
on perforated line, then peel from backing. Push strips down
into base paint & cover completely.
6
Label your paint color. Snap lid closed & store in tray.
Repeat steps 1 to 6 to make up to 15 more colors.
Mixer
Crank
Base
Paintbrush Slot
Paint Strip
Storage
1 Detachable Handle
8+
5
Store paint pots in tray.
Base Paint
Bottle Slot
Paint Pot Slot
1 Paintbrush