Page 1
DVS772 DIGITAL VIDEO A/B SWITCH INSTALLATION MANUAL IB637201...
Page 2
FEATURES Features of the DVS772 include a front panel three position command switch which is used to manually force either the primary (A) data channel, secondary (B) data channel, or (REM) remote external and automatic data switching.
SET-UP AND INSTALLATION Remove the equipment from the packing materials. The following materials should be supplied with each order. QTY 1 DVS772 (Blue Box). QTY 1 Power Cube +24 VDC. QTY 1 6 Position screw terminal Connector (attached). QTY 1 Rack Mount Angle Bracket (attached) or PMS7005A.
NOT FORCE THE SWITCH. There are three command modes for the switch. The first is marked (A), this will cause the DVS772 to manually force the data switch to the A input source. The second is marked (B), this position will cause a manual switch to the B input. The third position is (REM) which stands for REMOTE CONTROL.
24 VDC Power Cube (included) Current requirement 110 mA Connectors (Data) BNC (Female) Connectors (Power and Control) Plug-in Screw Terminal (6 position) Enclosure 3.5 x 4.5 x 1.5 Die Cast Aluminum Mounting Side Rack Mounting Bracket DVS772.ISB PAGE 4 OF 4...