Viking Designer DGVU Use & Care Manual page 17

All manuals and user guides at all-guides.com
Cleaning and Maintenance
Stainless Steel Parts
Some stainless steel parts may have a protective wrap, which must be peeled
off. All stainless steel body parts should be wiped regularly with hot, soapy
water at the end of each cooling period and with liquid cleaner designed for
this material when soapy water will not do the job. If build-up occurs, DO NOT
use steel wool, or abrasive cloths, cleaners, or powders. If it is necessary to
scrape stainless steel surface to remove encrusted material, soak area with hot,
wet towels to loosen the material, then use a wooden or nylon spatula or
scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape
stainless steel surfaces. Scratches are almost impossible to remove. DO NOT
permit citrus or tomato juice to remain on stainless steel surface, as citric acid
will permanently discolor stainless steel. Wipe up any spills immediately
All special ordered brass parts are coated with an epoxy coating.
DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON
ANY BRASS PARTS. All brass body parts should be wiped regularly
with hot soapy water. When hot soapy water will not do the job, use
every day household cleaners that are not abrasive.
Brass Parts
All special ordered brass parts are coated with epoxy.
CAUTION
17