Chair Setup; Getting Comfortable; Main Power Switch; Adjust Pillow - Infinity RT8800 User Manual

Chair Setup

Getting Comfortable

Main Power Switch

To power up the chair, flip the main power switch
located on the back of the base of the chair to ON.
Ensure the electrical cord is connected to a 110V
grounded outlet and plugged into the power cord
port located on the back of the base of the chair.
- To avoid possible damage to product or injury to unsupervised children, always turn off power switch and
unplug massage chair from electrical outlet immediately after use.
- When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled
CAUTION
and that the unit be placed in an environment free of dust and moisture.

Adjust Pillow

Take a seat in the chair and take note of where the neck pillow
rests on your neck. Adjust the pillow so that it rests comfortably
in the arch of your neck. Do this by removing it from the velcro,
aligning it, and then reattaching to the velcro once it is in the
desired position.
Increase the Intensity of your Massage - Manually
To make the massage more intense, you can also remove the pillow pad or the pillow pad
and the pillow to remove cushioning between you and the massage mechanism in the seat
back.
TM
Truefit Body Scanning
Select any auto program. The chair will automatically begin scanning your body, mapping your
back, shoulders, and neck. During this process it is important to remain seated back into the
chair without lifting your head.
The scan can be viewed on the Tablet Remote screen. If fine tuning is needed just after your
body scan, wait for the shoulder adjust prompt to appear and then use the Back Adjustment
buttons to move the massage rollers up or down for the perfect shoulder kneading position.
Power Cord Port
8
Main Power Switch
Neck Pillow