Advertisement
®
TRANE
General Information
Foreword
These instructions do not attempt to
cover all variations in systems, nor to
provide for every possible contigency
to be met in connection with
installation. Should further information
be desired or should particular
problems
arise
which
sufficiently covered for the purchaser's
purpose, the matter should be referred
to the manufacturer.
Warranty
Warranty is based on the general terms
and conditions of Trane Company. The
warranty is void if the equipments is
repaired or modified without the written
approval of the manufacturer, if the
operating limits are exceeded or if the
control system or the electrical wiring
is modified. Damage due to misuse,
lack of maintenance or failure to comply
with the manufacturer's instructions or
recommendations is not covered by the
warranty obligation.
Reception
On arrival, inspect the unit before
signing the delivery note. Specify any
damage on the delivery note, and send
a registered letter of protest to the last
carrier of the goods within 72hours of
delivery. Notify the local Trane Sales
Office at the same time. The unit
should be totally inspected within 15
days of delivery. If any concealed
damage is discovered, stop unpacking
the shipment. Take photos of the
damaged material if possible. Notify
the Carrier immediately by phone and
registered mail. Notify the local Trane
Sales Office. Concealed damage must
be reported within 15 days of delivery.
Check the unit nameplate to confirm
that the proper unit was shipped.
Available power supply must be
compatible
with
characteristics
specified
component nameplates.
i
Installation
General Information
This manual covers the installation,
operation and maintenance of the
Trane FWDD Chilled Water Blower Coil
units. These new air handler models
are
completely
are
not
incorporate
assembly,
flexibilty, servicing and maintenance
accessibility
accessory line.
Note: "Warnings" and "Cautions"
appear at appropriate places in this
manual. Your personal safety and the
proper operation of this machine
require that you follow them carefully.
The manufacturer assumes no liability
for instllations or servicing performed
by unqualified personnel.
Handling
The unit will be supplied with a
shippling
packaging over the unit casing. The
packaging should be kept on the unit
during handling or storage on site.
If it is necessary to remove the
packaging for inspection prior to
completion of on site handling, retain
packaging parts and reapply them by
tapping in position to prevent damage
to the casing. The unit as supplied
has a shipping base which is suitable
for handling by a fork lift truck. If it is
necessary to sling the unit, use
spreader bars under the shipping
base. Ensure that ropes do not cause
abrasion to the surface of the unit.
electrical
on
redesigned
to
a
single
slab
coil
improved
application
and
an
improved
base
and
protective
Hide quick links:
Advertisement
