EnGenius FreeStyl SIP User Manual page 44

e. Enter a phone book entry without a name; all records
without a name will be placed on the top of the phone
book list.
f. To enter the name, press the corresponding keypad
number one or more times according to the order of
the character on the key.
See table below for a list of available characters and
their orders. For example, press
character "A," twice for "B," etc.
Notes:
1.
When entering a phone number, the cursor automatically advances to the
next digit field. Use
backward or forward to insert or delete (the digit above the cursor or left
of the cursor if the cursor is on the right of the last digit).
2.
When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you
need to enter consecutive characters from the same key, you can wait for
the cursor to advance or use
cursor backward or forward manually. Also use
cursor to insert (to the left of the cursor) or delete (the character above
the cursor or left of the cursor if cursor is on the right of the last character).
3.
By default, all letters are entered in upper case. Use
between upper and lower cases.
4.
A "Pause" entry represents a 1-second delay in dialing the following digits,
which is useful when calling a sequence of segmented numbers (e.g.,
access codes, credit card numbers, auto-attendant entries, etc.) Pause is
entered by pressing the ＃ key twice (LCD displays P). Entering pause
twice (PP) will result in 2-seconds pause in the dialing.
2 once for the
or scrolling key to move the cursor
or scrolling key to move the
~44~
or to move the
＊
the key
to toggle