EnGenius FreeStyl SIP User Manual page 21

Long-range sip cordless phone
Hide thumbs Also See for FreeStyl SIP:
Table of Contents

Advertisement

d. During the stand-by mode, you can enter the phone book by pressing
the scrolling key.
e.
Phone Book transfer via air
i. Transfer a specific Phone Book to one handset or all registered
handsets
ii. Transfer all Phone Books to one handset or all registered handsets
15. Key Tone
a.
Four-level Key Tone volume selections (Off/Low/Medium/High).
b. Four Key Tone type selections.
16. Call Timers
a.
Displays call time duration for current call, during and immediately after
the call.
17. Programmable Feature Call
a.
Allows user to pre-program the most frequently used Feature codes into
the FreeStyl SIP, which is adjunct to the PBX system.
b. Up to 10-entries can be saved.
c.
Once the feature code has been programmed, you can quickly perform
those functions during the call by pressing the
18. Menu Display
a.
To avoid mis-setup in the "Call Settings"(MENU-4), "Phone Settings"
(MENU-5), and "Base Settings" (MENU-6), these settings can be hidden.
b. The Handset password is required before entering Menu Display (MENU-
8), the default handset password is "0000."
c.
When disabling the settings, they will no longer be displayed unless
enabled by entering Menu Display again.
19. PA On/Off
a.
Enable or disable the Broadcast function.
b. When PA is Off, the handset cannot receive Broadcast from the base
station or other registered handsets; but it can broadcast to other
registered handsets.
20. Group Setting
a.
Allows the handset to subscribe to one or several groups.
Re: Up to 7 groups (1~7) can be subscribed.
21. Custom Name
OPTION
~21~
soft key.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Freestyl sip2Freestyl sip-hc

Table of Contents