Pioneer SC-LX81 Service Manual page 15

5
TUNER
Press first to access:
MPX
– Switches between stereo and mono reception
of FM broadcasts. If the signal is weak, then
switching to mono will improve the sound quality.
NOISE CUT MODE 1 to 2 can be selected
when receiving AM broadcasts.
EON
– Use to search for programs that are
broadcasting traffic or news information.
Set the operation selector switch to
STATUS
– Press to check selected receiver settings.
PHASE CTRL
– Press to switch on/off Phase Control
or Full Band Phase Control.
CH LEVEL
– Press repeatedly to select a channel,
then use / to adjust the level.
11 Receiver controls
AUTO/DIRECT
– Press to select Auto Surround
or Stream Direct listening.
STEREO/A.L.C.
– Switches between the stereo
playback mode and the Front Stage
Surround Advance mode.
STANDARD
– Press for Standard decoding and to
switch between the various
Neo:6 options.
ADV SURR
– Use to switch between the various
surround modes.
THX
– Press to select a Home THX listening mode.
12 Number buttons and other receiver/component
controls
Use the number buttons to directly select a radio
frequency or the tracks on a CD, DVD, etc.
ENTER
can be used to enter commands for TV or DTV.
After set the remote control operation switch to
SIGNAL SEL
– Use to select an input signal.
SLEEP
– Use to put the receiver in sleep mode and
select the amount of time before sleep.
DIMMER
– Dims or brightens the display.
SR+
– Switches the SR+ mode on/off.
SBch
– Use to select the surround/virtual surround
back channel mode.
MCACC
– Press to switch between MCACC presets.
A.ATT
– Attenuates (lowers) the level of an analog
input signal to prevent distortion.
GENRE
– Automatically selects the most appropriate
Advanced Surround mode for the genre of the source
currently being played back (this feature is available
only when a Pioneer DVD recorder supporting HDMI
Control is connected to this receiver via HDMI).
HDMI OUT
SC-LX81 only:
terminal.
TUNER
Press first to access:
D.ACCESS
– After pressing, you can access a radio
station directly using the number buttons.
CLASS
– Switches between the three banks (classes)
of radio station presets.
5
6
RCV
first to access:
Pro Logic IIx and
RCV
:
– Switch the HDMI output
SC-LX81
6
7
13 SOURCE
Press to turn on/off other components connected to the
receiver.
14 Remote control illumination button
Press to turn on/off the illumination of some of the
buttons and the LCD light.
15 Remote control operation selector switch
RCV
Set to to operate the receiver,
operate the TV or the source device.
RCV
When this switch is set to
controlled (used to select the white commands above the
A.ATT
number buttons ( , etc.)). Also use this switch to set
up surround sound.
16 VOL +/–
Use to set the listening volume.
17 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
7
8
TV SOURCE
or to
, the receiver can be
15
8
A
B
C
D
E
F