Table of Contents
Advertisement
Maintenance and Storage
WARNING:
1.) Refer to the engine manual for proper engine maintenance and storage.
2.) Always shut off the engine, disconnect the spark plug, and move all control valve handles back and forth to relieve
system pressures before repairing or adjusting the splitter except as recommended by the manufacturer.
3.) FIRE HAZARD. A running engine is hot enough to ignite debris. Turn off engine and clean debris and chaff from engine
cylinder, cylinder head fins, blower housing rotating screen, and muffler areas. If the engine is equipped with a spark
arrester muffler, clean and inspect it regularly (follow the engine manufacturer's service instructions.) Replace if
damaged.
4.) FIRE HAZARD. Only store and handle fuel outdoors. Gasoline vapors can ignite if they collect inside an enclosure.
Explosion can result.
5.) FIRE HAZARD. Never store log splitter inside where there is an open flame, spark, or pilot light as on water heaters,
space heaters, furnaces, clothes dryers, or other gas appliances EVEN IF the log splitter's gas tank is empty. Allow
machine to cool 5 minutes before storing.
6.) FIRE HAZARD. Before each use, check fuel tank and fuel lines for leaks. Any fuel leak is a fire hazard. Fix any fuel
leaks before starting engine.
7.) Clear debris from movable parts, but only when the engine is shut off. This will help to make sure the log splitter is in
safe working condition.
8.) Check to be sure all nuts, bolts, hose clamps and hydraulic fittings are tight to assure the log splitter is in safe working
condition.
9.) Make sure all guards and shields are replaced after maintenance is complete.
10.) If a part needs replacement, only use parts that meet the manufacturer's specifications. Replacement parts that do not
meet specifications may result in a safety hazard or poor operation of the log lift.
11.) Never modify the log splitter or log lift in any way, modifications may create a safety hazard and result in serious injury.
a.) Never attach a rope, cable, or other remote device to the splitting control, or lift control.
b.) Never increase the height of the splitting wedge.
c.) Never increase the speed of the splitting ram.
d.) Never increase the speed of the log lift.
e.) Never increase the pressure setting of the pump or control valve.
Rules for Safe Operation
Save These Instructions
7
Advertisement
Table of Contents
