Table of Contents
Advertisement
Chapter 3
Boot Settings Configuration
The sub-menu is used to configure the power-on state when the system
boots up.
Main
Advanced
Boot Settings Configuration
Quick Boot
AddOn ROM Display Mode
Bootup Num-Lock
BootUp CPU Speed
Typematic Rate
System Keyboard
Primary Display
Parity Check
Boot To OS/2
Wait For F1 If Error
Hit
DEL
Message Display
Processor Serial Number
Internal Cache
System BIOS Cacheable
BIOS Flash Protection
v02.03 (C)Copyright 1985-2000, American Megatrends Inc.
Quick Boot
The item speeds up Power On Self Test (POST) after you power on the
computer. When setting the item to Enabled, BIOS will shorten or skip
some check items during POST. Settings are Enabled and Disabled.
AddOn ROM Display Mode
This item is used to determine the display mode when an optional ROM is
initialized during POST. When set to Force BIOS, the display mode used by
AMI BIOS is used. Select Keep Current if you want to use the display
mode of optional ROM.
Bootup Num-Lock
This item is to set the Num Lock status when the system is powered on.
BIOS SETUP UTILITY
Chipset
PCIPnP
[Enabled]
[Force BIOS]
[On]
[High]
[Fast]
[Present]
[ V G A / E G A ]
[Disabled]
[No]
[Enabled]
[Enabled]
[Disabled]
[Write-Back]
[Enabled]
[Enabled]
3-16
Power
Boot
Security
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
↔
Select Screen
↑ ↓
Select Item
+ −
Change Option
F 1
General Help
F 1 0
Save and Exit
E S C
Exit
Exit
Advertisement
Table of Contents
