Setting Your Location; Changing The Fuse On The Gps 20Sm - Garmin Mobile XT Owner's Manual

Setting Your Location

When you activate the GPS for the first time, or if you have traveled more than
600 miles with the GPS receiver turned off, the GPS must initialize. To shorten the
initialization time, set your location on the map.
1. Select (Menu
2. Select (Menu
3. Select New
4. Select a point on the map near your current location, then select

Changing the Fuse on the GPS 20SM

CAuTioN: When replacing the fuse, do not lose any of the small pieces and make
sure they are put back in the proper place.
1. Unscrew the black (or silver), round end piece and remove it.
2. Remove the fuse (glass and silver cylinder) and replace with a
1A, 3AG, standard blow fuse.
3. Ensure that the silver tip is placed in the black end piece.
Screw on the black end piece
Garmin Mobile XT Owner's Manual
™
> ) Settings > System
>) GPS Info.
Location.
> Remote GPS.
a
PPendix
(Menu >) OK.
Unscrew Unscrew
end end
piece piece
silver tip silver tip
fuse fuse