Functions - Frigidaire FFTM25SI User Manual

3.2 Functions

Notes:
(The picture above is only for reference. The actual configuration will depend on the physical product or
statement by the distributor)
1) Setting button,
A: Setting button
2) Display screen
3) LED: ① level
(COLD)
LED: ② level
LED: ③ level (MID) LED: LED: ④ level
LED: ⑤ level (COLDER)
4) Display
When the refrigerator is on power, the display screen all LED light for 3 seconds, the default temperature
is MID (③ level).
When there is a failure, the LED light shows the fault code (loop display), the LED light displays as
following table:
Error code
LED⑤, ④flashing
LED⑤, ③ flashing
LED⑤, ② flashing
5) Level setting
Every time you press setting button, the level changes once, after setting the level 15s, the refrigerator will run
according to the setting value.
Level adjustment to:
1 level
6) Memory Function
The refrigerator can keep memory of following running status when power off.
7) Damper adjusting slider
The initial position of the damper adjusting slider is on the far-right side.
For better user experience, it is recommended to push the slider to right position, and turn
the SETTING KEY to MID position. If it is not enough cool inside the refrigerator compartment, please
check whether the slider is in left position, turn the slider to the right side.
Temperature sensor failure of refrigerating chamber
Defrost temperature sensor failure of freezing chamber
The ambient temperature sensor failure
2 level 3 level
COLDER FRIDGE
COLDER FREEZER
12
Error description
4 level 5 level