Garmin GPS 25 LP Technical Specification page 13

Garmin gps 25 lp oem/sensors-engine: technical spec
Table of Contents

Advertisement

a navigation solution. However, the host system should allow the board set to
remain on for at least 12.5 minutes after the first satellite is acquired (see Section
4 for more information on status indications).
2) If the memory backup battery fails, the sensor board will search the sky as
described above. The system designer should be aware of the availability of
standby power input to the board set to prevent this situation.
3) If the initial data is significantly inaccurate, the board set will perform an operation
known as AutoLocate
circumstances, will require 1.5 minutes to calculate a navigation solution.
AutoLocate
, unlike search the sky, does not require that the sensor board
TM
continue to operate after a fix has been obtained.
. This procedure is fully automatic and, under normal
TM
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gps25-lvcGps25-lvsGps25-hvs

Table of Contents