Ice Case
Open the door and lift up the case toward you.
To mount the case, insert the right and left projections of the
case into the rectangular holes.
Draw the door fully, and draw the Slide case
respectively.
● Do not remove the Slimline slide case.
Caution
Slimline slide case
Slide case
When installing it, insert the pins on the left/right of the Lower freezer case into the square holes on the frame to install it.
Moreover, hitch the pins on the left/right of the Slide case to the outside of the Lower freezer case.
Draw the door fully and pull up
the Vegetable case as shown in
the figure.
Upper Case
If the lower case is not removed as shown in Step
When installing it, insert the pins on the left/right inner sides of the Vegetable Case into the square holes on the frame, and put the edge of the
Vegetable Case on the frame to install it.
How to attach the slide door
Ice Compartment/Upper Freezer
(Ice Compartment)
Slide case, Lower freezer case
Fork
Upper Case, Lower Case
Lift up the front part of the
door, and draw it further and
incline it.
(Right and left) projections
Rectangular hole on the frame
, remove the door and then remove the lower case. For how to remove the door.
(Ice Compartment/Upper Freezer/Lower Freezer/Vegetable Compartment)
Frame
・Upper Freezer case
Rectangular hole
(Lower Freezer)
Lift up the Lower freezer case.
Lower freezer case
Frame
(Vegetable Compartment)
Lower Freezer/Vegetable Compartment
(Upper Freezer)
Projection
Frame
Lift up the Vegetable Case
toward you.
Lower Case
Frame
55