Info On Nearest Waypoint; Fly Direct-To A Nearest Waypoint; Change Your Approach To A Nearest Waypoint - Garmin 80 Pilot's Manual

Apollo CNX80 Pilot's Guide
4. Press <-SBY to insert the highlighted frequency into the Standby
position or <-A-> to insert the frequency into the Active position.

Info on Nearest Waypoint

1. Press NRST.
2. Press the key for the waypoint type you want to search.
3. Turn the Large knob to select the nearest waypoint.
4. Press the INFO button.

Fly Direct-To a Nearest Waypoint

1. Press NRST.
2. Press the key for the waypoint type you want to search.
3. Turn the Large knob to scroll thru the list of nearest waypoints. High-
light the desired waypoint.
4. Press the Direct-To button.
5. Press the Direct key.

Change Your Approach to a Nearest Waypoint

1. Press NRST.
2. Turn the Large knob to select the desired nearest waypoint.
3. Press the INFO button. Note, if "IFR" is listed with the identifier,
instrument approaches are available. Press INFO again to toggle
back to the Nearest Waypoint list.
4. With the desired airport selected, press the D-> key.
5. Press the Dest key. Press Menu/Enter to accept the change to your
flight plan. Press Menu/Enter to activate the new flight plan direct
to the selected waypoint.
6. Press FN and then PROC.
7. Press Appch for the destination waypoint. Select the approach with
the Large and Small knobs. You can also select the type of
approach with the selection keys on the right side of the display.
Press Menu/Enter.
7. Press EXEC. The CNX80 will ask if you want to replace the Active
flight plan with the Modified flight plan. Press Menu/Enter.
16