Page 1
Tianjin Generalscan IOT Technology Co; LTD GS-D100BT Bluetooth Adapter For USB&RS232 User Guide...
Page 2
2. User Instruction First, For USB type ,Plug the USB to PC and plug micro USB to GS-D100BT .Power on with USB cable, For RS232 port, power the RS232 cable with 5V DC。...
Page 3
Long press Mode Change Button for 6 second,The Bluetooth mode will change from Mater to Slave and vice versa. If GS-D100BT work in Master mode, Scanner must work in Slave mode for pair usage. If GS-D100BT work in Slave mode, Scanner must work in Master mode .Normally, Scanner will work in Slave mode and GS-D100BT work in Master...
Page 4
Only left the scanner for pairing .Long press reset button for 6 second, The GS-D100BT will blinking for ready pairing . After few second, both blue LED for scanner and GS-D100BT will be stop blink. It indicate successful paired with scanner and GS-D100BT.