Sena Parani ESD100V2 Quick Start Manual

Features
· Output Interface UART, Bluetooth Specification
v2.0+EDR
· Transmit Power - Max. 18dBm
· Receiving Sensitivity: -90dBm(0.1%BER)
· Compact size - 27.5 x 30.0 x 14.0 (mm)
1.08 x 1.18 x 0.55 (in)
· Provides transparent RS232 serial cable replacement.
· Supports up to 4 multiple simultaneous connections.
· Profile: Bluetooth Serial Port Profile.
· Interoperability with PDA, laptops etc.
· on-board chip antenna
· Firmware upgrade via windows-based software
(ParaniUpdater)
· Working distance ( In an open field ): Nom. 100 meters
· Easy to use Windows configuration tool available.
· No external drivers required.
Pin Assignment
Pairing DCD DSR DTR RST
7 8 9 1 0 1 1
1
2 3 4 5
G ND TXD RXD RTS CTS
Pin # Signal
1 GND
2 TxD
3 RxD
4 RTS
5 CTS
6 VDD
7 Pairing
G ND
8 DCD
1 2 9 DSR
10 DTR
6
11 RST
VDD
12 GND
OEM Bluetooth-Serial Module,
The Parani-ESD100V2
Class1 type Embedded Bluetooth serial module for RS232 cable
replacement. The Parani-ESD100V2 is a compact size Bluetooth
serial module with built-in chip antenna. It supports 100 meter of
wireless transmit distance. The Parani-ESD100V2 also supports
up to 4 multiple simultaneous connections.
Typical application areas of the Parani-ESD100V2 include:
- RS232 cable replacement
- Wireless Factory monitoring
- Truck/Bus monitoring system
- PLC programming
- Car Diagnostics
- Wireless Printing
- Wireless POS system
- Wireless logistics
- Wireless machine(healthcare/industrial) monitoring
Direction Description
- Power Ground
Output UART Data Output
Input UART Data Input
Output UART Ready to Send
Input UART Clear to Send
Input DC Input (3.0~3.3V)
Input Pairing Input (Active Low)
Output Bluetooth Connect Detect (Active Low)
Input Data Set Ready
Output Data Terminal Ready
Input Reset (Active Low)
- Power Ground
ESD100V2
is a Bluetooth v2.0+EDR
Signal Level
Ground
TTL
TTL
TTL
TTL
Power
TTL
TTL
TTL
TTL
TTL
Ground