Tripp Lite N48M Series Installation Manual page 3
1 u ultra high-density fiber panel all-in-one solution
Hide thumbs
Also See for N48M Series:
- Installation manual (4 pages) ,
- Installation manual (20 pages) ,
- Installation manual (21 pages)
Advertisement
Installation
2
Place the panel into position in an enclosure or open-frame rack. Align the mounting holes and use rack-mounting
screws (2 per side, not included) to secure the unit.
2
3
To access the LC or MTP-MPO cables, untighten two snap rivets and pull out the tray.
Note: The tray will be tilting down.
3
3
Advertisement
