Console server management switch console server with poweralert console server (257 pages)
Summary of Contents for Tripp Lite N48M Series
Page 1
N48M/N48S 2U/3U Series Este guía está disponible en español en la página de Tripp Lite: tripplite.com/support Ce guide est disponible en français sur le site Web de Tripp Lite : tripplite.com/support Русскоязычная версия настоящего краткого руководства представлена на веб-сайте компании...
Page 3
Installation Extend the front door by pulling it away from the unit. Tighten the side screws. Non-Extended Extended Place the panel into position in an enclosure or open- To access the MTP-MPO cables, untighten the two frame rack. Align the mounting holes and use rack- handscrews located on the rear of the unit , lift the mounting screws (2 per side, not included) to secure...
Page 4
Installation Locate the appropriate MTP-MPO cable. Remove the Velcro strap, then uncoil and pull cable, as required. Note: Excess cable slack can be recoiled inside the panel. Preloaded 2U/3U Panel Available rear-to-front cable access Cables are labeled per port in meters 1111 W.