Advertisement

PB-250
Comb Binding Machine
GB
95495 1 12/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PB-250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intimus PB-250

  • Page 1 PB-250 Comb Binding Machine 95495 1 12/18...
  • Page 3 ENGLISH Punching Level Comb holder Comb Comb Size Selector Comb Comb Comb Size Size Size Selector Selector Selector Binding level 21 Disengagement punch pins Paper entrance Punching margin controller Side Margin Controller Base board CAPABILITIES Technical Data Width : 300mm Punching Thickness : 25 sheets Punch PVC Cover 2 Sheets...
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS-KEEP FOR FUTURE USE Please read before use and keep for future When punching; - always ensure the machine is on a stable surface - test punch scrap sheets and set the machine before punching final documents - remove staples and other metal articles prior to punching - never exceed the machines quoted performance Keep the machine away from heat and water sources.
  • Page 5 SET UP 3.Ensure the comb opening lever is pushed backwards. BEFORE YOU BIND 1.Select the correct punch profile for the sheet size select releasable dies as appropriate 2.To cancel a punch, pull the pin forward. 3.Select the correct back margin depth for the number of sheets P/03...
  • Page 6 BEFORE YOU BIND 4.Test punch scrap sheets to check edge guide setting.after according to your file's size to select the paper position.then insert files and push the handle down and then release it to it's original place 5.Place the plastic rings to the back of comb opening upwards.push the binding handle frontwards to open the plastic rings...
  • Page 7 REMOVAL OF WASTE CLIPPINGS The waste tray is located under the machine and is accessed from the front side. For best results empty the tray regularly. TROUBLESHOOTING Problem Problem Cause Cause Solution Solution Problem Problem Cause Cause Solution Solution Adjust edge guide until hole pattern Edge guide not Punched holes are not central is correct...
  • Page 8 Intimus International GmbH Bergheimer Straße 6 - 12 88677 Markdorf / Germany Tel.: ++49 (0)7544 / 60-0 Fax.: ++49 (0)7544 / 60-248 E-mail: sales.de@intimus.com www.intimus.com 95495 1 12/18...

Table of Contents