Garmin StreetPilot c320 Quick Reference Manual page 2

Step 1: Configure Your c320
Press and hold the Power button
on-screen instructions to set up your c320; you only have to do this once.
Step 2: Install Software and Load Maps
Before using your c320, you need to install software on your computer using the
DVD-ROM and then load maps on your c320. Refer to the Setup Guide for complete
instructions.
Step 3: Mount Your c320
To ensure a tight grip, clean and dry your windshield before you mount the suction
cup.
Fit the bottom of your c320
into the cradle of the suction
cup mount.
Continued on the top of the next column....
on the side of the unit to turn it on. Follow the
Tilt your c320 back until
it snaps in place.
Tension knob
Place the suction cup on the
windshield. Flip the lever back,
toward the windshield.