2
Model 74046 Magnetoresistance Insert Probe Option
2.0 Software
Installation
2.1 MR
Measurement
System
Configuration
2.1.1 Page One
Model 74046 MR Insert Probe Option
Follow these instructions to install the software.
1. Turn on the PC and rack console.
2. Insert the MR disk into the CD Rom drive and run the software installation file,
"LakeShoreMRV2.X Setup.EXE".
At the end of the software installation, the MR Measurement System Configuration
program will start. This program configures the MR software for use with your
hardware. Follow these instructions to configure the MR software.
Select Setup, run and view files.
D
FIGURE 1 Page one