Advertisement
NOTE: THIS UNIT IS THERMALLY PROTECTED AND WILL SHUT DOWN IF HIGH TEMPERATURES ARE SENSED. IF
YOUR LAMP IS NOT PERFORMING AS EXPECTED, EXECUTE THESE STEPS BEFORE CONTACTING YOUR
DISTRIBUTOR:
CHECK ALL CORDS FOR ABRASIONS OR DAMAGE AND REPLACE AS NECESSARY.
CLEAN FINS AND FAN AREA OF DUST AND DEBRIS.
MAKE SURE THAT THE UV LENS IS CLEAN AND FREE OF CRACKS OR SCRATCHES.
ENSURE THAT THE POWER SUPPLY IS SUPPLYING DC POWER.
CHECK THE SPLIT CENTER PIN ON FEMALE DC BARREL JACK CONNECTOR. ENSURE THERE IS A 2mm
GAP BETWEEN THE TWO PIN HALFS.
RECERTIFICATION SERVICES FOR ALL LAMPS ARE AVAILABLE UPON REQUEST. PLEASE CONTACT OUR SALES
DEPARTMENT FOR MORE DETAILS REGARDING FACTORY RECERTIFICATION.
REL, INC. WILL REPAIR, WITHOUT CHARGE, ANY DEFECTS DUE TO FAULTY MATERIALS OR WORKMANSHIP FOR
ONE YEAR FROM THE DATE OF PURCHASE. THIS WARRANTY DOES NOT COVER PART FAILURE DUE TO WEAR OR
TOOL ABUSE. FOR FURTHER DETAIL REGARDING WARRANTY COVERAGE AND/OR WARRANTY REPAIR
INFORMATION, PLEASE CALL 1-906-337-3018. THIS WARRANTY DOES NOT APPLY TO ACCESSORIES OR DAMAGE
CAUSED WHERE REPAIRS HAVE BEEN MADE OR ATTEMPTED BY OTHERS.
Advertisement
