Advertisement
THIS UV LIGHT EMITS A VERY LARGE AMOUNT OF UV-A RADIATION THAT CAN DAMAGE UNPROTECTED EYES AND
SKIN. PLEASE USE CAUTION WHEN PERFORMING INSPECTIONS WITH THIS LAMP.
ALWAYS WEAR POLYCARBONATE SAFETY GLASSES AND NEVER LOOK DIRECTLY INTO THE LAMP.
WEAR GLOVES AND PROTECTIVE CLOTHING TO AVOID DIRECT EXPOSURE TO SKIN.
DO NOT PLACE THE LAMP FACE DOWN WHILE THE UV LAMP IS ON, AS THIS WILL LEAD TO HEAT
BUILDUP AND DAMAGE THE LED AS WELL AS THE SURFACE IN WHICH IT IS SET UPON.
1.
AFFIX MOUNT RAM-202U TO A WELL SUPPORTED SURFACE.
2.
AFFIX POWER SUPPLY (UV-2031) TO A FLAT SURFACE AND PLUG INTO A SWITCHED AC SOURCE.
(100-240V 50/60Hz 1.5A, 12 UNITS MAX ON 16A TYPE C CIRCUIT BREAKER AT 120V)
Advertisement
