Commodore modem 300 User Manual page 57

line conference, so that what you type is not mixed in with the other
information on the screen. Your text is displayed in a different color
at the bottom of the screen. To exit this mode, press <RUN-STOP>.
[ALT] J
Enter the new time in the form of HHMM. No return is necessary.
The computerwill automatically put in the colon between the hours
and minutes.
[ALT] K
This key will allow you to set up function key definitions for com­
monly used commands. You may define each of the eight function
keys to be items such as your User ID, or Password. Press number 1
through 8 to choose which function key to define. Press <return> if
you want the command to be executed. End the function key defini­
tion with the <RUN-STOP> key. [ALT] K will also let you load and save
function key definitions by pressing L or S, and typing the filename
as prompted. You may also view the funtion key definitions by press­
ing V in the [ALT] K menu.
[ALT] L
This key will toggle Line feeds ON orOFF. For <return> only, leave
this toggled OFF. If the host computer requires <return> and <line-
feed> then toggle this ON. An " L" will be visible on the status line
when line feeds are ON.
[ALT] M
This command will allow you to change between half or full duplex,
change the numberof stop bits between 1 and 2, change the word
length to 7 or 8 bits, and change the parity to Even, Odd, Mark,
Space, or None. This is all done with the <CRSR UP/DOWN> key.
Every combination of baud, duplex, stop bits, word length, and par­
ity are displayed on a rolling basis. Simply press <CRSR UP/DOWN>
Set the Clock
Function Keys
Toggle Line Feeds
View/Change Modem Settings
51