Table of Contents
Advertisement
RENAME:
changethenam eofafile
format:
r<drive#):<new name) = <old name)
Example: change file " abc" on drive 1 to " def"
RESET:
return disk unit to power-up status,
format:
uj (4040s, MSDs, new 1541s, 1571s)
U;(old 1541s)
SCRATCH: erase (delete) a file from the disk directory,
format:
s < drive#): < filename) [, < drive#): < filename)...]
Example: delete 3 files from drive 1 called " abc," " def," and
" ghi."
VALIDATE:
check the allocated blocks on a disk. Use this com
mand to recover space from an improperly closed file (indicated by
an asterisk (*) next to the file type when you list a directory),
format:
v<drive#)
Example: validate the disk in drive 0.
SET READ OR WRITE CHANNEL:
used by the program.
format:
/<direction)<device# minus8)<drive#)
Example: set read channel to device 8, drive 0
Example: set write channel to device 10, drive 1
Note: (RETURN) is not required with the SET command. Do
the command over gain if you make a typing error.
r1:def = abc
s1:abc,1:def,1:ghi
v0
set the device and drive number
/r00
/w21
32
Advertisement
Table of Contents
