Maintenance - Yunmai Pro User Manual

Important
YUNMAI Smart Scale should not be used to diagnose or treat any medical
•
situation.
Do not disassemble, squeeze, puncture the product or put it into water, fire or
•
exposes it to temperature higher than 60° (140°F).
Notice before use
Please ignore the first weighing reading at your first time use or after moving the
•
scale.
After scale power on or reset, please wait for the LED display flash "" • "" for
•
several seconds, and then start your weigh-in.
After each move of the scale, please wait for 5 seconds for the sensor to self-
•
recalibrate with the floor, and then weigh for accurate reading.
Note
Following groups may not get accurate results:
•
Juveniles
•
Professional athletes
•
Pregnant women
•
Users with Cardiac Pacemaker device
•
Weighing Notice
Do not weigh during charging.
•
The scale surface may become slippery in humid places, please watch your steps.
•
Before meal or before bath is the most recommend time for weighing, because
•
eating and bathing may affect the body moisture
and temperature ,which might affect the sensor accuracy."
•
Recommend to weigh yourself at the same time and same condition in each day
•
for more accurate data record.

Maintenance

Use a damp cloth to wipe the surface of the scale.
•
Do not use any detergent to clean the scale, because detergent might damage
•
the ITO conductive coating which may affect the accuracy of detecting body
fat data
4