Garmin GPSMAP 4210 Owner's Manual page 29

6. Select Done to finish the route or
To create a route in another location:
1. From the Home screen, select
2. By pressing the ROCKER, use the map pointer (
the new route.
3. Select Add Turn to mark the starting point of the route.
4. Choose the location of the first turn and select
5. Select Done when the route is complete.
To create a route using Auto Guidance:
1. From the Navigation chart, select your destination.
2. Select Navigate To >
NOTE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate To > Route
creating a route.
To edit a route
1. From the Home screen, select
2. Select the route to edit.
3. Select Edit Route. You can edit the route name, turns, or delete the route.
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select Navigate To >
GPSMAP 4000 Series Owner's Manual
Cancel Route
Information >
Guide To. Your route is calculated.
To. The auto guidance path stays on the screen, allowing you to trace it while
Information
>
Go To (or Route To).
to delete the route.
User Data > Routes > New
) to select the initial location you want to start
Add Turn. Repeat until the route is complete.
User Data > Routes.
W t ?
here o
Route.
2