LG F14U2TDHN Service Manual page 48

ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
1 Remove the Back Cover.
2 After loosening the Bolt, Rotor, pull out the
Rotor.
1 Remove the 6 Bolts from the Stator.
2 Disconnect the 2 Connectors.
Motor Stator
V ~ U (8~11Ω)
U ~ W (8~11Ω)
W ~ V (8~11Ω)
1 Remove the Hinges (Damper) at the Tub.
2 The Hinge(Damper) at the Base is pulled off by
pressing on the snaps at the sharp end.
3 The Hinge at the Base is pulled off.
(In directions of the arrow)
48
Hall Sensor
U V W
Common ~ Ha (5~15kΩ)
Common ~ Hb (5~15kΩ)
Hb
Common
Ha