LG F14U2TDHN Service Manual page 25

ERROR
8 MOTOR LOCKED
E RROR
9
POWER
FAILURE
10
NFC MODULE
ERROR
11 NFC VERSION
ERROR
SYMPTOM
* nC is displayed only in the first screen of the Load
* nU is displayed only in the first screen of the Load
25
CAUSE
The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
Reconnect or repair the connector.
The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
The washer experienced a power failure
Press the start/pause button
The connector in the DISPLAY PCB ASSEMBLY
is not connected to the connector of
NFC PCB ASSEMBLY.
Reconnect or repair the connector.
The NFC HARNESS between the NFC PCB
ASSEMBLY and DISPLAY PCB ASSEMBLY is cut
(open circuited).
Replace the DISPLAY PCB ASSEMBLY.
The NFC PCB ASSEMBLY is out of order/defective.
Replace the NFC PCB ASSEMBLY.
Test Mode.
NFC version is not matched.
Replace the NFC PCB ASSEMBLY.
Test Mode.
Page 34