Garmin GPSMAP 4008 Installation Instructions Manual page 14

Marine Video Cable
The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite
video sources, and PC monitor output (4008/4208/5008/5208 = VGA output, 4012/4212/5012/5212 = XGA output). Marine Video inputs are
only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.
1 & 2. VIDEO 1 and VIDEO 2 Inputs (RCA connectors) allow input from two separate NTSC/PAL compatible video devices, such as VCR,
DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the Owner's
Manual for details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device
attaches to the Video 1 (Black Cable) or Video 2 (Gray Cable) RCA connectors.
3. Use the PC monitor output (HD 15-pin) connector for remote viewing of the MFD display on a computer monitor. The remote monitor
must be capable of at least VGA resolution and have multi-sync capability.
3 3
2 2
1 1
4
PIN 1 PIN 1
PIN 2 PIN 2
PIN 17 PIN 17
Marine Video Cable Marine Video Cable
End View End View
Note Connector
1 RCA-1
CENTER
RCA-1 OUTER
2 RCA-2
CENTER
RCA-2 OUTER
3 HD-15 PIN 1
HD-15 PIN 2
HD-15 PIN 3
PIN 7 PIN 7
HD-15 PIN 5
HD-15 PIN 6
HD-15 PIN 7
HD-15 PIN 8
HD-15 PIN 10
HD-15 PIN 13
HD-15 PIN 14
HD-15 PIN
SHELL
Pin Function
2 VIDEO 1 IN (BLACK jACKET)
6 VIDEO 1 IN, GND
11 VIDEO 2 IN (GRAy jACKET)
15 VIDEO 2 IN, GND
1 VGA, ANALOG-RED
4 VGA, ANALOG-GREEN
3 VGA, ANALOG-BLUE
13 VGA, ANALOG, GND
8 VGA, ANALOG-RED, GND
8 VGA, ANALOG-GREEN, GND
8 VGA, ANALOG-BLUE, GND
13 VGA, SyNC-GND
7 VGA, H-SyNC
12 VGA, V-SyNC
9 VGA, OVERALL SHIELD
GPSMAP 4000/5000 Series Installation Instructions