Advertisement
Parts & Features (cont.)
11
12
13
11. Dirt Filter
12. Dust Bin Cover
13. Dust Bin Cover Handle
6
wards.com
How to Use
1. Make sure the vacuum control dial is OFF. Plug the cord into an electrical
outlet.
2. Turn the control dial to MAN for manual operation:
a. The power indicator light will illuminate.
b. Sweep debris toward the inlet at the base of the unit and press the
manual activation button with your toe or broom to initiate
vacuuming.
c. Manual mode will run for 5 seconds. Depending on the amount of
debris, it may be necessary to press the manual activation button
more than once.
3. Turn the control dial to AUTO for automated operation:
a. The power indicator light will illuminate.
b. Sweep debris toward the inlet at the base of the unit. Sensors will
detect the debris and automatically initiate vacuuming.
c. Vacuuming will cease once the sensors no longer detect debris.
NOTE:
A "pile" of debris is needed for the sensors to properly activate.
4. Remember to empty the dust bin often for optimum suction performance. The
dust bin indicator light will let you know when the dust bin is full.
a. To empty the dust bin, turn the control dial to OFF and unplug the
unit.
b. Pull the dust bin outward from the vacuum housing. Grasp the bin
firmly and lift it out of the unit.
c. Hold the dust bin with one arm and use the opposite hand to grab the
dust bin cover handle. Set the dust bin cover aside and empty debris
into a trash receptacle..
d. Replace the dust bin cover and reassemble the dust bin in the housing
(there are 2 grooves in the bottom of the bin that fit easily over a rod
in the front of the unit housing).
1
888
•
557
3848
•
•
7
Advertisement
