Samsung AC009BNLDCH Service Manual page 118

No Parts
1 PANEL-FRONT 5) The GRILLE INLET is fixed to body by
Samsung Electronics
Procedure
hooks in the center and side area.
6) Separate the hook pulling end of the
GRILLE INLET as shown in figures.(Watch
out for the damage of hooks)
7) To detach the PANEL FRONT from the
main frame, unfasten 2 screws at the
bottom. (use (+) Screw Driver)
8) To detach the PANEL FRONT from the
main frame, loosen 4 hook structures.
When separate the hooks: pull out each
ribs near the hooks as shown in figures.
(Watch out for the damage of hooks)
Disassembly and Reassembly
Remark
3-65