Related Manuals for DMT DLD-72 MKII
Summary of Contents for DMT DLD-72 MKII
- Page 1 MANUAL ENGLISH DLD-72 MKII Ordercode: 101205 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
DLD-72 MKII Table of contents Warning ....................................2 Unpacking Instructions ............................. 2 Safety Instructions ..............................2 Operating Determinations ............................3 Connection with the mains ............................. 3 Return Procedure ..............................4 Claims ..................................4 Description of the device ..............................5 Overview ..................................5 Frontside .................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • DMT DLD-72 MKII • Euro plug power cable 2m •... -
Page 4: Operating Determinations
Leave the system switched off until it has reached room temperature. If your DMT device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your DMT dealer for service. -
Page 5: Return Procedure
DLD-72 MKII Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 6: Description Of The Device
Description of the device Features The DMT DLD-72 is a professional rack mount double monitor system. It can be used for VJ monitoring, surveillance systems and any other multimedia setup where monitoring is necessary. It is equipped with the most common inputs, BNC, RCA and S-Video. You can adjust the screens to your desired settings with easy separate menus for each screen. -
Page 7: Frontside
DLD-72 MKII Frontside Fig. 02 01) LCD Display 02) LED Power Indicator Monitor 1 03) LED Power Indicator Monitor 2 04) Monitor Power Switch Push the button to activate both or only one of the two screens. 05) Input Push the button to switch between HDMI, AV1, AV2 and VGA modes. -
Page 8: Backside
DLD-72 MKII Backside Fig. 03 09) Video BNC Input (AV2) Connect the coax video output of a media device to this input. 10) Video BNC Output (AV2) Connect the coax video input of another monitor, screen or TV-set to this buffered output. -
Page 9: Installation
Connection: 01) Turn the power (18) switch off. 02) Connect the DLD-72 MKII to your video devices using the proper cables. CAUTION: Be sure that the power is off, when connecting the cables. 03) Turn the power (18) switch on. -
Page 10: System Setup
DLD-72 MKII System Setup Note: To simplify the instructions, this manual is presented from the perspective of Monitor 1. Monitor 2’s setup is carried out in the same way. Simultaneous referring to both monitors at the same time would cause unnecessary confusion. -
Page 11: Functions
DLD-72 MKII Functions 01) Color Fig. 05 While in Menu, press the menu (06) button again. A thin blue line is now seen under BRIGHTNESS. The blue line indicates the parameter which is supposed to be adjusted at a time. -
Page 12: Adjust
DLD-72 MKII 02) Adjust Fig. 07 In this screen you can adjust basic main display parameters such as: Auto Config (On/Off), Horizontal Position, Vertical position, Phase and Clock. 03) OSD Fig. 08 In this screen you can edit menu screen parameters, such as: Horizontal Position, Vertical Position, OSD Timeout (the amount of time after which the menu screen disappears if none of the buttons is pressed) and Transparency (adjustment range is from Off to 7 –... -
Page 13: Function
DLD-72 MKII 04) Function Fig. 10 In this screen you can edit the following parameters: • Display Ratio • Sleep • Blue Screen • Sharpness • Mode • Exit While editing Display ratio, you can select one of the three screen resolution presets (16x9, 4x3 and Auto). -
Page 14: Exit
DLD-72 MKII You can also adjust whether Blue Screen is switched on or off. It defines the color of the display before the unit is connected to another external device. See Fig. 13. Fig. 13 While editing Mode, you can choose from four display presets. See Fig. 14. -
Page 15: Maintenance
DLD-72 MKII Maintenance The DMT DLD-72 MKII requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. -
Page 16: Product Specifications
DLD-72 MKII Product Specifications Power supply: AC 100V-240V, 50/60 Hz Power consumption: 25 Watt Display Type : 7" TFT Power Connector: Euro plug Input Connectors: BNC, VGA, HDMI, RCA Output Connectors: BNC, VGA, HDMI, RCA Dimensions: 482 x 79 x 132mm (LxWxH) - Page 17 DLD-72 MKII Ordercode: 101205...
- Page 18 DLD-72 MKII Ordercode: 101205...
- Page 19 DLD-72 MKII Ordercode: 101205...
- Page 20 ©2021 D.M.T.
Need help?
Do you have a question about the DLD-72 MKII and is the answer not in the manual?
Questions and answers