Appendix; Removing Your Navigator Iii From The Motorcycle Mount; Connecting To Your Computer - Garmin BMW Motorrad Navigator III Owner's Manual

Garmin bmw motorrad navigator iii: owners manual
Table of Contents

Advertisement

A
PPENDIX
Removing Your Navigator III from the
Motorcycle Mount
1. Use the security screwdriver to loosen the screw on the top
of the cradle lock.
2. Lift the cradle lock up until it clicks.
3. Pull the BMW Motorrad Navigator III unit out of the mount.
4. Slide the power connector to the left to disconnect the
power cable.
34
A
PPENDIX

Connecting to Your Computer

NOTE: Do not connect the USB cable to your computer until
you have loaded the USB drivers using the enclosed DVD-
ROM.
To update your software, load additional maps, or load Custom
POIs, connect your Navigator III to your computer using the USB
cable provided.
Step 1: Load the USB Drivers
Before connecting the USB cable to your computer, place the
enclosed DVD-ROM into your computer's DVD-ROM drive.
If the DVD-ROM does not start automatically, click
then Run.... Type the letter of your DVD-ROM drive followed
by "setup" (example: "D:\setup"). Then press Enter. Follow the
on-screen instructions.
Step 2: Connect AC Power
Connect the enclosed AC power cable to the power connector
on the back of the Navigator III Connect the end to an available
electrical outlet.
Start
and
Navigator III Owner's Manual

Advertisement

Table of Contents
loading

Table of Contents