Advertisement
Quick Links
SAN YUAN ELECTRIC HOIST
CS
TYPE PARTS LIST
MAINTENANCE AND
OPERATIONAL INSTRUCTIONS
Thank you for your wise choice of our distinguished electric hoist.
For your better understanding of the performance of this model,
Operational safety and inspection, please read carefully and keep this
manual in a safe place.
SAN YUAN ENTERPRISE CO., LTD
Advertisement
Related Manuals for SAN YUAN CS
Summary of Contents for SAN YUAN CS
- Page 1 Thank you for your wise choice of our distinguished electric hoist. For your better understanding of the performance of this model, Operational safety and inspection, please read carefully and keep this manual in a safe place. SAN YUAN ENTERPRISE CO., LTD...
- Page 2 CAUTIONS IN OPERATION AND MAINTENANCE An electric hoist has been used as a safe and convenient machine to save time and labor in operation. Before use, however, careful attention must be paid to operational safety and inspection procedures. Therefore, before operating this electric hoist, please read the following instructions and follow correct operational methods.
- Page 3 C CAUTIONS FOR THE USE OF ELECTRICAL HOIST For the sake of safety, do not apply a load in excess of the rated load. Ensure if the load is tightly fastened? Before applying the load, the chain Wire ROPE must be straightened to buffer the impact.
- Page 4 D-1 Routine inspection items: Depress the button switch and let the hoist run idle, check if the upward and downward operation are normal? Is the hoist operation smooth? Is there abnormal noise when it is with load? Check if the chain is oiled or damaged? Is the brake operation normal when the winding is stopped? Is the lower hook wasily rotating? D-2 Regular inspection items:...
- Page 5 Our CS TYPE CHAIN HOIST has been specially designed and tested. So the main body is especially short, and your operating space is widened. The following the points must be followed in the operation. (A) Inspection of clutch: This hoist is fitted with a safety clutch, so that the motor will run idle when the hook reaches the upper and lower limits or the load is excessive.
- Page 8 CHAIN HOIST PART LIST PART PART PART NAME SIZE Q,TY NO. PART NAME SIZE Q,TY S001 Upper Hook Ass’Y 27 S027 Spring Washer S001-05 1/4CS & 1/2CS 28 S028 Control Box S001-10 1CS 29 S029 Magnetic Switch S001-20 2CS 30 S030 Sprocket S002 M Frame...
- Page 9 Push Button 74 S074 Ball Bearing 6201 zz S100-2 2P Button 75 S075 1ST Pinion S100-4 4P Button S075-05 1/4CS & 1/2 CS S100-6 6P Button S075-10 1CS & 2CS 101 S101 Screw 6×8 76 S076 Snap Ring 102 S102...
- Page 10 S113-b For 12M Chain S113-c For 18M Chain 114 S114 Chain Hanger Pin B 115 S115 Chain Stopper 118 S118 119 S119 Spring Washer 120 S120 CS Stud 123 S123 124 S124 Spring Washer 125 S125 Sleeve 126 S126 Bolt...
- Page 11 MOTOR TROLLEY CAUTIONS FOR THE USE OF MOTOR TROLLEYS Before mounting the motor trolley on the I-beam, the width of I-beam must be measured. As shown in the following diagram, adjust the clearance between the two wheels of the trolley to the correct position. Then, mount it onto the I-beam and tighten the nuts at two ends.
- Page 13 MOTOR TROLLEY PART LIST PART PART PART NAME SIZE Q,TY NO. PART NAME SIZE Q,TY T001 Gear Wheel 11 T011 Rotor Ass'y 1/2T001 1/4MT & 1/2MT 1/2 T010 1/4MT & 1/2MT 1T001 1T010 2T001 2T010 2MT & 3MT 3T001 5T010 5T001 12 T012 Ball Bearing...
- Page 14 MOTOR TROLLEY PART LIST PART PART PART NAME SIZE Q,TY NO. PART NAME SIZE Q,TY 27 T027 Distant Ring 35 T035 Control Box 1T027 1/4MT & 1/2MT ST035 1/4MT-5MT 220V OR 380V 2T027 36 T036 Name Plate 5T027 1/4T036 1/4MT 28 T028 Hanger Pin 1/2T036 1/2MT...
Need help?
Do you have a question about the CS and is the answer not in the manual?
Questions and answers