SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. • Consult your physician before using this machine. Consultations are recommended especially for those with pre-existing medical conditions (for example, diabetes). •...
Page 4
OVERVIEW Control panel Handle Pedal Remote holder Slide track Control panel Display Light indicator FUNCTION button MODE button DIRECTION button SPEED button POWER button...
Page 5
Remote START/STOP button FUNCTION button DIRECTION button Speed adjustment buttons MODE button POWER button...
OPERATION • Place the machine on a level surface below where you will sit. • Plug the power cord into a socket and switch on the socket. Press the POWER button on the control panel or remote to turn the stepper on. •...
Page 7
Direction The pedals on the stepper can be set to go forwards, or backwards. To change the direction, press the DIRECTION button on the control panel or remote. Note: User adjustments to the speed and direction are only available in the manual program. Mode Pressing the MODE button changes what is seen on the display.
CLEANING & CARE Cleaning Ensure the stepper is turned off and unplugged before cleaning. To clean, wipe the surface with a damp cloth soaked and wrung out with mild detergent. Storage Place the stepper in a dry, ventilated, and cool area. Note: •...
TROUBLESHOOTING Status Possible Cause Solution Plug the power cord into the Stepper does not Power cord is not plugged in. socket and switch on the turn on. power. Check the power cord is Power failure connected. Press the POWER button to 30 minutes has passed, and the turn the stepper back on and program has finished.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the FSELMNEPSPA and is the answer not in the manual?
Questions and answers