Adjustment Procedure And Self-Check - Panasonic TX-29PS2D Service Manual

ADJUSTMENT PROCEDURE
Item / Preparation
+B SET-UP
1. Receive a Window pattern.
2. Set the controls :
Brightness Minimum
Contrast Minimum
UG2 / CUT OFF
1. Receive a Window pattern.
2. Set Brightness and Contrast to minimum.
3. Set the TV into Service Mode 1.
4. Select UG2 item.
SELF CHECK
Self-check is used to automatically check the bus lines and hexadecimal code of the TV set.To enter Self-Check mode, press
the STATUS button on the remote control and at the same time press the down (-/v) button on the customer controls at
the front the TV set. To exit Self Check, switch off the TV set at the power button.
Adjustments
Confirm the following voltages:
TP4
TP5*
TP6
TP7
TP8
TP11**
TP12
* Volume to minimum
Press "+" or "-". Adjust the screen VR till LED is just switched on.
TX-29PS2D
OPTION 1 7C
OPTION 2 27
4
5 ± 0,25V TP14
16 ± 0,5V TP21
8 ± 0,5V TP120
7,7 ± 0,5V TP121
3,3 ± 0,2V TP123
11,7 ± 0,5V TP124
142 ± 1,5V
** Volume to maximum
TX-29PS2F
TX-29PS2P
TX-29PS2P/B
FC
27
5 ± 0,25V
11,5 ± 0,5V
28,5 ± 3V
215 ± 10V
-14V ± 1V
14 ± 1V