Table of Contents
Advertisement
Categories of parameters
Basic settings
Detailed settings
Homing
I/F logic
To move the focus to a parameter, press [Tab] key.
To move the focus in reverse, press [Shift] + [Tab] keys.
Description
Parameters for basis of operation are set.
A pulse output method to a servo driver and speed limit are set.
Software limit, base speed, in-position time and all the compensation values
are set.
Parameters required for homing function are set.
An interface logic ( I/O reguration ) between the positioning unit and external
devices ( drive and each sensor ) are set.
4-3
Advertisement
Table of Contents
