Remove A Pairing - Nokia G300 User Manual

3. Make sure the other device is turned on.
You may need to start the pairing process
from the other device. For details, see the
user guide for the other device.
4. To pair your phone and the device, tap Pair
new device, and tap the device on the list of
discovered Bluetooth devices.
5. You may need to type in a passcode. For
details, see the user guide for the other
device.
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need to
be in direct line-of-sight. Bluetooth devices must,
however, be within 10 meters (33 feet) of each
other, although the connection may be subject to
interference from obstructions such as walls or from
other electronic devices.
Paired devices can connect to your phone when
Bluetooth is turned on. Other devices can detect
your phone only if the Bluetooth settings view is
open.
Do not pair with or accept connection requests from
an unknown device. This helps to protect your
phone from harmful content.

REMOVE A PAIRING

If you no longer have the device with which you
paired your phone, you can remove the pairing.
1. Tap Settings > Connected devices >
Previously connected devices.
2. Tap next to a device name.
3. Tap FORGET.
SEND YOUR CONTENT USING BLUETOOTH
When you want to share your content or send
photos you've taken to a friend, use Bluetooth to
send them to compatible devices.
You can use more than one Bluetooth connection at
a time. For example, while using a Bluetooth
headset, you can still send things to another device.
1. Tap Settings > Connected devices >
Connection preferences > Bluetooth.
2. Turn Bluetooth ON.
3. Go to the content you want to send, and tap
> Bluetooth.
4. Tap the device to connect to. You can see
the Bluetooth devices within range.
5. If the other device needs a passcode, type
in the passcode. The passcode, which you
can make up, must be typed in on both
devices. The passcode in some devices is
fixed. For details, see the user guide of the
other device.
The passcode is only used when you connect to
something for the first time.