Advertisement
HCDTSET36
TABLE
(ITEM # SWT36 / ITEM # STBB80)
Identify and locate all hardware & components listed.
1)
Place table top (ITEM # SWT36) on smooth at surface.
Protect the top from scratches. Attach each Table Leg (C)
to Table Top (A) using 8 pieces screws ( H ).
3)
Attach X-support (B) using 1 piece small screws ( E ).
Call Customer Service 636-532-9888 if parts are missing. Do not exceed maximum weight capacity
HARDWARE & COMPONENTS
#A)
TOP
1 PIECE
#B)
X-SUPPORT
#C) TABLE LEGS
4 PIECES
4 PIECES
#D)
HEX SCREWS
2)
Attach X-Support (B) to each Table Leg (C) using 4 screws (D) .
4)
When all pieces are attached, tighten each screw securely.
#E)
HEX BOLT
1 PIECE
#F)
HEX KEY
1 PIECE
#G) HEX KEY
4 PIECES
8 PIECES
#H)
WEIGHT CAPACITY
TABLE : 330 LBS
PAGE 1 OF 2
Advertisement
Table of Contents
Related Manuals for Amerihome HCDTSET36
Summary of Contents for Amerihome HCDTSET36
- Page 1 HCDTSET36 HARDWARE & COMPONENTS WEIGHT CAPACITY 1 PIECE HEX BOLT 1 PIECE TABLE : 330 LBS TABLE X-SUPPORT HEX KEY 1 PIECE #C) TABLE LEGS 4 PIECES #G) HEX KEY 4 PIECES 4 PIECES 8 PIECES (ITEM # SWT36 / ITEM # STBB80) HEX SCREWS Identify and locate all hardware &...
- Page 2 HCDTSET36 COMPONENTS FOR EACH CHAIR WEIGHT CAPACITY CHAIR 1 PIECE CHAIR : 330 LBS CHAIR WOOD SEAT 1 PIECE SCREWS 14 PIECES (ITEM # DCBNT4 / ITEM # SWTCS2) Identify all components before assembly. CHAIR SEAT SCREWS Locate chair, seat and pack of 14 screws. You will need a Turn chair upside down and position wood seat.
Need help?
Do you have a question about the HCDTSET36 and is the answer not in the manual?
Questions and answers