Amerihome HCTABLE Assembly Instructions

Hand crank table

HCTABLE

Hand Crank Table

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT USE THIS PRODUCT!

QUESTIONS? PROBLEMS? CONTACT CUSTOMER SERVICE FIRST.

If you experience a problem, have questions or need parts for this product, visit our website

or call Customer Service at 1-888-287-6981, Monday-Friday,

http://www.amerihomebrand.com

8 AM - 4 PM Central Time. A copy of the sales receipt is required.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE

PARTS LIST

(A) TABLE TOP – 1 PIECE

(B) TABLE LEGS – 3 PIECES

HEX BOLT – 9 PIECES

WRENCH– 1 PIECE

WASHERS– 2 PIECES

Use For Leg Assembly (plus 1 Extra)

(16mm)

Table of Contents

Do you have a question about the HCTABLE and is the answer not in the manual?

Page 1 HCTABLE Hand Crank Table Assembly Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
Page 2 ASSEMBLY INSTRUCTIONS 1) Locate Support (C) and attach one Table Leg (B). 2) Attach the second Table Leg (B) using one Attach one Hex Bolt at top and two Hex Bolt at Hex Bolt at top and two at bottom. bottom using the Wrench.