RRSHA Series Hot Air Blower User Manual
2.3.6 Flat-Jacket Snow Melters (See ENM-2957 for Complete Details)
1. Uncoil the Flat-Jacket Snow Melter Rod near the switch point.
2. Install mounting clips to the rail between every tie, approximately 20" apart.
3. With the bow facing the outside, route the Flat-Jacket Snow Melter Rod through the
mounting clips and any braces.
Fig. 393
SnapTite Rail Clip Installation
Fig. 404
Bolt-On Clip Installation
Fig. 415
Flat-Jacket Snow Melter Rod Installation
ENM-3600-00
24