KNOVA KN WB-48 Manual page 5

PART 3
15) Put the left and right plate (22) and (22) on the floor
16) Install the plate (24) between (22) and (22)
(using 4 pcs 3 screws M6 x 0.39 in)
PART 4
19) Put the drawer into the frame of the work table.
20) Put the board (A)
and (B) on the frame.
17) Install another plate (23) between (22) and (22)
(using 4 pcs 3 screws M6 x 0.39 in)
M4 x 0.47 in
18) Install the drawer board (E) and two handles to the drawer
(using 8 pcs 4 screws M4 x 0.39 in and
6 pcs 2 screw M4 x 0.47 in)
M4 x 0.39 in
13