KNOVA KN WB-48 Manual page 3

PART 1
1) Put the right and left brackets (15) and (15)
of the perforated board on a flat surface
2) Fit the transverse bar (14) between the brackets of the
perforated board. (using 2 pcs 3 screws M6 x 0.39 in)
3) Use the screw M6 x 0.55 in to fix the perforated board
to the frame. (using 3 pcs 1 screws M6 x 0.55 in)
PART 2
7) Put the left and right feet (21) and (21) on a flat surface.
16
4) Position the left and right support brackets (16) and (17)
on the work table corners, (using 4 pcs 3 screws
M6 x 0.39 in)
5) Fit a cross bar (18) between the two upper support
brackets. (using 4 pcs screws 3 M6 x 0.39 in)
6) Mount the board (C) on the top of the frame.
(using 4 pcs trapping screws)
8) Joining the two real legs with a transverse bar (18).
(using 4 pcs 3 screws M6 x 0.39 in)
17