Ocean Sonics Gordon User Manual page 6

9. Add your hydrophone:
a. Click on the [
for the hydrophone(s) connected to the Battery Pack
b. Type in the serial number of the unit connected to the Battery Pack
c. If more than one hydrophone, repeat the process for each hydrophone
d. Go into the Action Menu (see
have been added for the number of hydrophones on the battery pack
e. Choose the settings for the Waveform Data, Spectrum Data, Delay and Smart Recorder
Settings.
f. A Start Delay is useful to start the duty cycle at a designated time (if no delay is chosen
the recording will begin at the start of the next minute after clicking apply)
g. Click Apply Settings: 'Click Here to Apply these settings to Battery Pack #_____'
The Apply Button will disappear to show that settings have been applied successfully.
+
] button to add a channel
Appendix
Gordon Smart Recorder User Guide
C) and ensure the proper number of channels
5