Gordon Quick Start - Ocean Sonics Gordon User Manual

1. Provide power to the Battery Pack
a. Insert batteries into Battery Pack (see Battery Pack User Manual)
b. Move toggle switch on the Gordon Board to the ON position (as seen below)
2. Attach hydrophone(s) to battery pack using a cable or directly in connector
3. Connect to the Gordon Board using a micro USB connector provided to set up for deployment
(see Appendix A)
a. Connect the micro USB cable to Gordon Board
b. Connect the opposite end of the cable to a USB port on your PC
4. Install the Gordon application provided on the USB drive (see
5. Open the Gordon application on your PC
6. Choose Connect to a Smart Recorder
7. Choose your device from the list:
a. Click on Battery Pack
b. Click Connect

Gordon Quick Start

ON
OFF
Gordon Smart Recorder User Guide
Appendix B)
3