Table of Contents
Advertisement
Installation
Follow the diagram to install the SIM card.
Tips: Always switch the device off and disconnect the charger before removing the SIM card.
1. Remove the back cover.
2. Insert the SIM card. Ensure that the contact area on the card is facing down and that the beveled
corner on the card is facing the beveled corner on the holder.
3. Finally cover the back.
Charge
Your battery has been partially charged at the factory. If the device indicates a low charge, do the
following:
1. Connect the charger to an outlet.
2. Connect the USB charger plug to your device‟s USB port.
3. When the device indicates a full charge, disconnect the charger from the device, then from the
outlet.
One：Using charge adapter
Advertisement
Table of Contents
