Honda ODYSSEY 2014 Manual page 89

Hide thumbs Also See for ODYSSEY 2014:

Table of Contents

uuChild SafetyuSafety of Infants and Small Children

Second row centre seating position

Tether Strap Hook

Third row outer seating positions

1. Take the anchorage fitting assembly out of the luggage area.

2. Remove the cap from the anchorage point on the lower tailgate sill.

3. Install the anchorage fitting, using the three spacers (10 mm type), three washers

and a bolt (50 mm) to the anchorage point as shown in the image.

Models with bench seat

1. Lower the head restraint its lowest position.

2. Route the tether strap over the head

restraint. Make sure the strap is not twisted.

3. Secure the tether strap hook to the

4. Tighten the tether strap as instructed by the

child restraint system manufacturer.

Anchorage Fitting

Chapters

Table of Contents