Light Switches - Honda ODYSSEY 2014 Manual

Light Switches

■
Manual Operation
Except Taiwanese models with
automatic lighting control system
Low Beams
High Beams
Flashing the high beams
Models without automatic lighting
control system and Taiwanese models
Low Beams
High Beams
Flashing the high beams
Turns on position, side
marker, tail, and rear
licence plate lights
Turns on headlights, side
marker, position, tail, and
rear licence plate lights
Rotating the light switch turns the lights on
and off, regardless of the power mode
setting.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
Taiwanese models
■
Lights off
Turn the lever to OFF either when:
• The transmission is in ( P .
• The parking brake is applied.
To turn the lights on again, turn the lever to
OFF to cancel the lights off mode. Even if you
do not cancel the lights off mode, the lights
come on automatically when:
• The transmission is taken out of
parking brake is released.
• The vehicle starts to move.
uuOperating the Switches Around the Steering WheeluLight Switches
1Light Switches
If you leave the power mode in VEHICLE OFF (LOCK)
while the lights are on, a chime sounds when the
driver's door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 108
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Your vehicle is equipped with the automatic
headlight adjusting system that automatically adjusts
the vertical angle of the low beam headlights. If you
find a significant change in the vertical angle of the
headlights, there may be a problem with the system.
Have your vehicle checked by a dealer.
P and the
(
Continued 193